TRIPREM MEMBERS

Academic Staff Members

	Kanao Fukuda, Professor, Head of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology
	Shahira Liza Binti Kamis, Dr, Senior Lecturer, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology
	Noor Ayuma Binti Mat Tahir, Dr, Senior Lecturer, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology
	Khairunnisa Binti Mohd. Pa’ad, Ts. Dr, Senior Lecturer, Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology
	Nur Zalikha Binti Khalil, Dr., Senior Lecturer, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology

Jun Ishimatsu, Technical Researcher,

Department of Mechanical Precision Engineering,

Malaysia-Japan International Institute of Technology

Nur Rasyidah Binti Rusli, Assistant Research Officer,

Department of Mechanical Precision Engineering,

Malaysia-Japan International Institute of Technology

	Nur Amanina Damira Bt Muhalim, “Oil Palm Empty Fruit Bunch (OPEFB) Fibre Reinforced Polyoxymethylene (POM) Composite Material”
	Norliyana Binti Mustapar, “Oil Palm Empty Fruit Bunch (OPEFB) Fibre Reinforced Polyoxymethylene (POM) Composite Material”
	Zureena Binti Abu Samah, “”
	Muhammad Maaruf, “”

	Nurul Iffah Binti Ahmad Azmi “Surface and Tribology Characterization of DLC/graphite Reinforced Bi-layered oxide Coating by Pulse Anodizing on Aluminium Alloys”
	Nurhidayatul Nabila Bt Daswarman “Characterization of Functionalized Carbon Nanotube Additives in Conductive Grease”
	Muhammad Alif Akmal Bin Mohd Zamri “Surface-functionalized polymer additives in grease for friction and wear reduction”
	Hasnol Hadi Bin Zakaria, “Synthesis of DLC/Graphite reinforced bi-layered Oxide Coating on Aluminium Alloys”
	Nurul Fatihah Binti Mohd Safri, “Tribological Characterization in Addition of Graphite Particle Reinforced into Trivalent Chromium Bath on Non-hazardous Chromium Coating”
	*Nur Hidayah Binti mohamad,* “Biotribological Chracterization of UHMWPE Composite”.
	*Bakhit Irfan Bin Yusoff,* “Improvement Lubricity of Grease on Rolling Bearing”.
	*Muhammad Bustami Bin A Razak,* “Tribological Evaluation of Composite Ni-Based Coating Under Grease Lubrication”.
	*Nur Adilah Binti Mohd Rawian,* “Tribological characterization of heat-treated DLC coated particles reinforced oxide coating”.
	Ikmal Alif Bin Sukri, ” Design, Testing, and Analysis of Differential Phase Transmitter”

	*Muhammad Eizuan Bin Daud,* “Ultrasonic effects on grinding fluid”
	*Mior Muhammad Amzar bin Mior Faizrul,* “Influence of Funtionalized Carbon Nanotubes on Tribological Characteristics of Lithium EV Grease”
	*Edmund Chai Chun Yeung,* “Influences of atmospheric humidity on tribological properties of self-mated sliding of carbide and nitride coatings (Daido Kogyo)”
	*Yin Zhi Xuan,* “Water adsorption on the pre-distorted surface of carbon steel and its tribological properties”
	*Nurul Damia Binti Senu,* “Effect of Surface roughness to the adhesion properties of adhesively bonded Al alloy with hybrid nanoadhesive”
	*Haziq Haiqal Bin Mohd Yaki,* “Friction Reduction on Metal-to-Metal Sliding Through New Grease Formulation From Used Cooking Oil”
	*Syarif Osa Reshky Bin Resmin,* “Development of carbon dioxide and microplastic using the arduino uno”
	*Tee Zhen Xiang,* “Evaluation of the characteristics of amorphous calcium carbonate and candle soot hybrid using the electrospray methodology”