Ex-Staff Member
 |
Zahriddin Mumimov, Dr. Senior Lecturer, Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology |
 |
Aug Lwim Moe, Dr, Senior Lecturer (February 2012 – February 2016) Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology |
 |
Noor Maniza Binti Othman, Research Assistant (August 2015 – February 2016) Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology |
 |
Muhammad Faidhi Bin Mohd Radzi, Assistant Research Officer (March 2011 – May 2018) Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology
|
 |
Nurul Zariah Binti Jakariah@Zakaria, Research Assistant (September 2018 – February 2019) Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology
|
 |
Hazfarahin Binti Md. Ali, Assistant Research Officer (March 2017 – May 2019) Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology
|
 |
Kua Loan Kiat, Research Assistant ( March 2021 – December 2022) Member of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology |
Ex- Postgraduate Students
 |
Hong Wei Chee, “Influences of Sliding Speed on the Friction Force due to Adsorbed Water”
|
 |
Noor Dalilah bt A Manaf, Graduated PhD Student (March 2024) “Physical Model of Adhesive Wear Influence by Atmospheric Humidity” |
 |
Amirah Binti Basir, “Tribological Performance of Multi-Shape Textured Surfaces in Mechanical Applications”
|
 |
Nur Aszreen Binti Zulkifli, Graduated Master Student (Feb 2024) ” Tribological Characterization of DLC Coated Particles Reinforced Oxide Coating”
|
 |
Nur Afieqah Bt Md. Ghazazi, Graduated Master Student (Jan 2024) “Influence of Pulse Anodizing on The Structure of Composite Oxide Coating”
|
 |
Sharifah Khadijah, Graduated Master Student (Jan 2024) “Improving Tribological Properties of UHMWPE Biomaterials by Surface Energy Modification”
|
 |
Afiqah Binti Abdul Rahman Graduated Master Student (May 2023) “Resin Material Used for Permeation Tube Method Humidifier”
|
 |
Zaid Ali Subhi Graduated Ph.D. Student (May 2021) “Strengthening Mechanical and Tribological Characterization of Anodic Oxide Film on Aluminium Alloy” |
 |
Syazwani Binti Mohammad Graduated Master Student (May 2021) “Strengthening Mechanical and Tribological Characterization of Anodic Oxide Film on Aluminium Alloy” |
 |
Nur Hidayah Binti Shahemi Graduated Master Student (Mac 2020) “Failure Analysis of Retrieved UHMWPE Acetabular for Hip Replacement and Modification & Biotribological Behavior of UHMWPE Composite for Biomedical Applications” |
 |
Ammar Hossam Aboubakrelseddik Abouelezz Graduated Master Student (Mac 2019) “Development of Lapping Plate Evaluation System (LAPES)” |
|
Muhammad Faidhi Bin Mohd Radzi Graduated Master Student (Mac 2018) “Influence of Humidity on Tribological Properties of Miniature Ball Bearings” Currently working at NSK Ltd. Japan |
 |
Ooi Ee Lee Graduated Master Student (May 2018) “Elucidation of Lapping Plate Characteristic to Its Lapping Performance and Finished Product Qualities” Currently Working as Quality Management Engineer at OARAM Opto Semiconductors (Malaysia) SDN BHD. |
 |
Sangeeth Suresh Ph.D. Student “Study on The Initial Cutting Tool Contact Mechanism in Precision Machining using ABAQUs” |
 |
Ahmad Aizudding Bin Abdul Aziz Ph.D. Student “Fundamental Study of Aspherical Lens Mold” |
 |
Muhammad Faiz Bin Wahab Master Student “Study of New Lapping Technology for Aspherical Lens” |
Undergraduate Students
Bachelor Degree Students – 2023/2024
 |
Ooi Xin Yin, “Understanding of basic characteristics of surface textures technology for next-generation power transmission” |
 |
Alang Hafiz Ussama Bin Abdullah, “Effect of applied load on friction behavior of grooved hexagonal and circle textured surfaces under starved lubrication condition” |
 |
Muhammad Amin Bin Mazlan, “Effects of Lubricant Additive On the Friction of Rolling Bearings”. |
 |
Jacob Lee Ning ZHi, “Ultrasonically Improvement for small-size CNC Machine”. |
 |
Rajvinderjeet Singh A/L Amarjeet Singh, “Influence of relative humidity on the tribological properties of hard coatings”. |
Ex-Undergraduate students
Final Year Project Student (2022/2023)
 |
Abdul Rauf Bin Abdul Samad Final Year Project Student (2022/2023) “Ultrasonically Improvement for Small Size CNC Machine”. |
 |
Muhammad Haikal Bin Mohd Faiz Azmi Final Year Project Student (2022/2023) “Influence of Frequency in Ultrasonically Exciter on Grinding Machine”. |
 |
Ahmad Aiman Bin Mohd Kamarudzaman Final Year Project Student (2022/2023) “Stability in Sliding Properties of Hydrophobic Materials in Different Atmospheric Humidity”. |
 |
Kania Admiranti Final Year Project Student (2022/2023) “Influences of Rhe Time and Frequency of The Sliding on The Sticky Keys Problem of Piano”. |
Final Year Project Student (2021/2022)
 |
Lutfir Rahman Bin Mohd Izani Final Year Project Student (2021/2022) “Influences of Wave Parameters on the Efficiency of a Forced Synchronized Differential Phase Reducer”. |
 |
Lee Jia Hong Final Year Project Student (2021/2022) “Ultrasonically assisted fluid on CNC turning Machine”. |
 |
Lai Xu Huan Final Year Project Student (2021/2022) ” Development of Tribo-Tester in High-Temperature Environment” |
 |
Wan Muhamad Syafiq bin Wan Rozali Final Year Project Student (2021/2022) “Fabrication oxide coating by pulsed anodizing”. |
 |
Hassan Aizuddin Binti Ruhama Final Year Project Student (2021/2022) “Influence of Trace Water in Nitrogen Environment on The Friction and Wear Stainless Steel “. |
 |
Azrai Dhiyauddin Bin Zul Azri Final Year Project Student (2021/2022) ” Electroplating of composite coatings containing graphite particles” |
Final Year Project Student (2020/2021)
|
Kua Loan Kiat Final Year Project Student (2020/2021) “Influence of Lubrication on the Efficiency of Forcedly Synchronized Differential Phase Transmitter” |
 |
Ho Mi Zhi Final Year Project Student (2020/2021) “Influence of Shaft Material on The Friction Behavior of Piano Bearing” |
 |
Henry Siam Jian Hong Final Year Project Student (2020/2021) “Tribology Behavior of SUS304 Under High-Temperature Condition” |
 |
Khairul Bariah Binti Hasmizol Final Year Project Student (2020/2021) “Development of Anodized Coating Method” |
 |
Muhammad Zaid Bin Malek Final Year Project Student (2020/2021) “Comparison of Algorithm for Automatic Lapping Process of BAll-Screw Shaft”
|
 |
Rashdan Azizan bin Idris Final Year Project Student (2020/2021) “Surface Texturing of Carbon Steel by Photochemical Machining”
|
 |
Nurul Syahirah Binti Abdul Rahman Final Year Project Student (2020/2021) “Evaluating self-lubricating of anode Oxide film on Aluminium Alloy Surface”
|
Final Year Project Student (2019/2020)
 |
Mohd Zakir Fathi Bin Hashimi Final Year Project Student (2019/2020) “Dry Sliding Wear Behavior of Fly Ash Anodic Composition Film”
|
 |
Tan Eng Joo Final Year Project Student (2019/2020) “Forcedly Synchronized Differential Phase Transmitter”
|
 |
Tan Chai Beng Final Year Project Student (2019/2020) “Development of Ultrasonic Effector”
|
 |
Bock Eu Siin Final Year Project Student (2019/2020) “Enhancing the Voltage Output of Triboelectric NanoGenerator (TENG) by Implementing Surface Modification on The Tribo-Dielectric Surface”
|
 |
Muhammad Izzaire Bin Hasssan Final Year Project Student (2019/2020) “Ultrasonically Lapping of Ball Screw Shaft”
|
 |
Loo Kun Zin Final Year Project Student (2019/2020) “Effect of Environmental Humidity on the Difference between Static and Kinetic Coefficient of Friction”
|
 |
Jeevan Rao A/L Siva Rao Final Year Project Student (2019/2020) “Assembly of Tribotester”
|
 |
Muhamad Haziq Bin Abdul Halim Final Year Project Student (2019/2020) “New Algorithm for Automatic Lapping Machine of Ball Screw Shaft”
|
 |
Nurul Illiannie Binti Azman Final Year Project Student (2019/2020) “Effect of Internal Time on Friction Force of Light Load Bearing”
|
 |
Tan Jiin Kuen Final Year Project Student (2019/2020) “Permeation Tube Method Humidifier”
|
 |
Ahmad Ridhwan Bin kamel Final Year Project Student (2019/2020) “Tribological Characterization for Polyoxymethylene Reinforced by Oil Palm Empty Fruit Bunch (OPEFB) Natural Final” |
Final Year Project Student (2018/2019)
 |
Alif OmarBin Elias Final Year Project Student (2018/2019) “Effect of Ultrasonic Vibration In CNC Turning Machine” |
 |
Ikmal Alif Bin ahmad Sukri Final Year Project Student (2018/2019) “Influence of Trace Water in Gaseous Environment on Tribological Properties of Pure Fe and Stainless Steel “ |
 |
Muhammad Saifulnizam Bin Mohd Yunus Final Year Project Student (2018/2019) “Tribological Characterization for Anodic Film Reinforced with Fly Ash Particles” |
 |
Nuratika Shaheera binti Rahama Final Year Project Student (2018/2019) “Tribological Characterization of Textured UHMWPE by Photolithography” |
 |
Syafreena Ezzany Binti Ismail Final Year Project Student (2018/2019) “Development of Automatic Lapping Machine for Ball Screw Shaft” |
 |
Siah Lee Sheng Final Year Project Student (2018/2019) “The Influence of Atmospheric Humidity on Sliding Properties of Polytetrafluoroethylene” |
 |
Amirul Ashraff Bin Mat Noh Final Year Project Student (2018/2019) “Effect of Humidity on Hydrogenated and Non-hydrogenated under Lubricated Condition” |
 |
Choo Tze Eu Final Year Project Student (2018/2019) “Tribological Characterization of Textured UHMWPE by Photolithography” |
 |
Shukri Nazri Final Year Project Student (2018/2019) “Tribological Characterization of Polyoxymethylene (POM) Reinforced by Oilpalm Empty Fruit Bunch (OPEFB)” |
 |
Amirul Adha Final Year Project Student (2018/2019) “Multiple Lubricants with Ultrasonic Excitation” |
Final Year Project Student (2017/2018)
 |
Tan Jia Wei Final Year Project Student (2017/2018) “Development of Ultrasonic Assisted Lapping Tool” |
 |
Leong Chee Hon Final Year Project Student (2017/2018) “Mirror Finishing of Spherical Surface” |
 |
Muhamad Aswad Bin Hussien Final Year Project Student (2017/2018) “Ultrasonic Exciter for Cylindrical Grinding” |
 |
Muhammad Lutfhi Naim Bin Mohd Sofi Final Year Project Student (2017/2018) “Fabrication and Tribological Characterization of Hars Anodic Films on Aluminium Alloy” |
 |
Ahmad Nu`aim Bin Nohaimi Final Year Project Student (2017/2018) “Optimization in Lead Accuracy of Automatic Lapping Machine for Precision Ball Screw Shaft” |
 |
Aly Hefny Mahmoud Hefny Final Year Project Student (2017/2018) “The Effect of Ultrasonic Excited Lubricant on GrindingProcess” |
 |
Mohd Amirul Che Lah Final Year Project Student (2017/2018) “Fabrication and Tribological Characterization of Textured Aluminium Alloy by Using Photolithography” |
 |
Ikmal Danial Musa Final Year Project Student (2017/2018) “Wear Particle Generation in Adhesive Wear Mechanism” |
|
Mohd Faimuzi Fahmi Mohd Final Year Project Student (2017/2018) “Adhesion Phenomena in Boundary Lubrication” |
|
 |
Yap Kian Kun Final Year Project Student (2016/2017) “Influence of Adsorbed Water on Adhesive Wear” |
Final Year Project Student (2016/2017)
 |
Chai Chee Yike Final Year Project Student (2016/2017) “Different Hardness Material” Currently, work as a Project Engineer at VS Industry Berhad |
 |
Goh Kok Zhen Final Year Project Student (2016/2017) “Variation of Ultrasonic Excitation in Grinding Lubrication Characteristic” Currently, work as a Product Engineer at RK South Asia SDN BHD |
 |
Lim Chin Yee Final Year Project Student (2016/2017) “Humidity Effects on Light Load Bearings of Piano” |
 |
Kan Hao Nan Final Year Project Student (2016/2017) “Ultrasonic Exciter for Cylindrical Grinding” |
 |
Omar Hefni Mahmod Hefni Final Year Project Student (2016/2017) “Automatic Lapping Machine for Ball-Screw Shaft” |
 |
See Hau Yee Final Year Project Student (2016/2017) “Ultrasonic Exciter Operating Frequency Controller” |
 |
Sri Prakathiswaran Mohana Dass Final Year Project Student (2016/2017) “Analysis Algorithm for Adhesion in Sliding” |
 |
Lai Wei Hang Final Year Project Student (2016/2017) “Development of a High-temperature Tribo-Tester” |
Final Year Project Student (2015/2016)
 |
Abdul Hafiz bin Hassan Final Year Project Student (2015/2016) “An Optimization Program of Ultrasonic Exciter Amplifier” |
 |
Azuwin Binti Ibrahim Final Year Project Student (2015/2016) “Ultrasonic Exciter for Cutting/Grinding Fluid” |
 |
Muhammad Ainurrasyid Bin Mohd Syukri Final Year Project Student (2015/2016) “Development of Automatic Lapping Tools for Ball-Screw Shaft” |
 |
Muhammad Firdaus Bin Hapizan Final Year Project Student (2015/2016) “Lubrication of an Abrasive Grain with Ultrasonically Vibrated Fluid” |
 |
Muhammad Hisyam Bin Rai Final Year Project Student (2015/2016) “Lubrication Assisted by Ultrasonic Lubrication” |
 |
Patrick Lim Shen Yi Final Year Project Student (2015/2016) “Influence of Repeated Contact on Electrical Resistance” |
Final Year Project Student (2014/2015)
 |
Muhammad Fitri Bin Yahya Final Year Project Student (2014/2015) “Study on Aspherical Lens Mould Lapping”
|
 |
Heng Chia Chia Final Year Project Student (2014/2015) “Adhesion Phenomena of a Screw Bolt” |
 |
Ahmad Syahmi Bin Abdul Aziz Final Year Project Student (2014/2015) “Study of Aspherical Lens Lapping” |
 |
Muhammad Hakim Bin jaafar Final Year Project Student (2014/2015) “Water Adhesion on Metal” |
Ex-Internship
| Nur Izzati Binti Moh Ridzuan |
Bachelor of Engineering Technology (Hons.). in Tool and Die, University of Kuala Lumpur (Feb 2014 – June 2014) |
| Tengku Nur Atiqah |
Bachelor of Engineering Technology (Hons.). in Tool and Die, University of Kuala Lumpur (Feb 2014 – June 2014) |
| Mohammad Shukeri Bin Zainuddin |
Bachelor of Engineering Technology (Hons.). in Tool and Die, University of Kuala Lumpur (Feb 2014 – June 2014) |