Academic Staff
Members
 |
Kanao Fukuda, Professor, Head of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology |
 |
Nur’azah Abdul Manaf, Dr, Associate Professor, Malaysia-Japan International Institute of Technology |
 |
Jun Ishimatsu, Dr, Senior Lecturer, Malaysia-Japan International Institute of Technology
|
 |
Shahira Liza Kamis, Dr, Senior Lecturer, Malaysia-Japan International Institute of Technology |
Associate Members
1 – Takehiro Morita, Assistant Professor, Kyushu University, Japan.
2 – Syahrullail Samion, Ph.D, Associate Professor, Universiti Teknologi Malaysia (UTM).
3 – Dr. Zahriddin Mumimov, PhD, Senior Lecturer, Nilai University.
Postdoctoral Researcher
 |
Noor Ayuma Binti Tahir |
Assistant Research Officer
 |
Nur Rasyidah Bt. Rusli |
 |
Kua Loan Kiat |
Students
Postgraduate Students (PhD)
 |
Noor Dalilah bt A Manaf, “Physical Model of Adhesive Wear Influence by Atmospheric Humidity” |
 |
Nor Ashwani Abd Rahim, “Photochemical Texturing Of Carbon Steel Surface for Tribological Optimization” |
 |
Nur Amanina Damira Bt Muhalim, “Oil Palm Empty Fruit Bunch (OPEFB) Fibre Reinforced Polyoxymethylene (POM) Composite Material” |
Postgraduate Students (Masters)
 |
Nur Hidayah Binti mohamad, “Biotribological Chracterization of UHMWPE Composite”. |
 |
Muhammad Bustami Bin A RAzak, “Tribological Evaluation of Composite Ni-Based Coating Under Grease Lubrication”. |
 |
Bakhit Irfan Bin Yusoff, “Improvement Lubricity of Grease on Rolling Bearing”. |
 |
Nur Adilah Binti Mohd Rawian, “Tribological characterization of heat-treated DLC coated particles reinforced oxide coating”. |
 |
Farra Adeera Binti Omar, “Hydroxyapatite composite coating for titanium implants” |
 |
Amirah binti Basir, “Tribological Performance of Multi-Shape Textured Surfaces in Mechanical Applications” |
 |
Nur Aszreen Binti Zulkifli, ” Tribological Characterization of DLC Coated Particles Reinforced Oxide Coating” |
 |
Ikmal Alif Bin Sukri, ” Design, Testing, and Analysis of Differential Phase Transmitter” |
 |
Nur Afieqah Bt Md. Ghazazi, “Influence of Pulse Anodizing on The Structure of Composite Oxide Coating” |
 |
Afiqah bt Abdul Rahman, “Resin Material Used for Permeation Tube Method Humidifier” |
 |
Sharifah Khadijah, “Improving Tribological Properties of UHMWPE Biomaterials by Surface Energy Modification” |
 |
Hong Wei Chee, “Influences of Sliding Speed on the Friction Force due to Adsorbed Water” |
Undergraduate Students
Ex-Staff Member
|
Zahriddin Mumimov |
Senior Lecturer Malaysia-Japan International Institute Technology
|
|
Dr Aung Lwin Moe |
Senior Lecturer (February 2012 – February 2016) Malaysia-Japan International Institute Technology |
Noor Maniza Binti Othman |
Research Assistant (August 2015 – February 2016) Malaysia-Japan International Institute Technology |
Nurul Zariah Binti Jakariah@Zakaria |
Research Assistant (September 2018 – February 2019) Malaysia-Japan International Institute Technology |
Hazfarahin Binti Md. Ali |
Assistant Research Officer (March 2017 – May 2019) Malaysia-Japan International Institute Technology |
Ex- Postgraduate Students
|
Zaid Ali Subhi |
Graduated Phd Student (Mei 2021) “Strengthening Mechanical and Tribological Characterization of Anodic Oxide Film on Aluminium Alloy”
|
|
Syazwani Binti Mohammad |
Graduated Master Student (Mei 2021) “Strengthening Mechanical and Tribological Characterization of Anodic Oxide Film on Aluminium Alloy”
|
|
Nur Hidayah Binti Shahemi |
Graduated Master Student (Mac 2020) “Failure Analysis of Retrieved UHMWPE Acetabular for Hip Replacement and Modification & Biotribological Behavior of UHMWPE Composite for Biomedical Applications”
|
|
Ammar Hossam Aboubakrelseddik Abouelezz |
Graduated Master Student (Mac 2019) “Development of Lapping Plate Evaluation System (LAPES)”
|
|
Muhammad Faidhi Bin Mohd Radzi |
Graduated Master Student (Mac 2018) “Influence of Humidity on Tribological Properties of Miniature Ball Bearings”
Currently working at NSK Ltd. JApan |
|
Ooi Ee Lee |
Graduated Master Student (May 2018) “Elucidation of Lapping Plate Characteristic to Its Lapping Performance and Finished Product Qualities”
Currently Working as Quality Management Engineer at OARAM Opto Semiconductors (Malaysia) SDN BHD.
|
|
Sangeeth Suresh |
PhD Student “Study on The Inital Cutting Tool Contact Mechanism in Precision Machining using ABAQUs”
|
|
Ahmad Aizudding Bin Abdul Aziz |
PhD Student “Fundamental Study of Asperical Lens Mold”
|
|
Muhammad Faiz Bin Wahab |
Master Student “Study of New Lapping Technology for Asperical Lens”
|
Ex-Undergraduate Students
|
|
Final Year Project Student (2021/2022) “Influences of Wave Parameters on the efficiency of a Forced Synchronized Differential Phase Reducer”.
|
|
|
Final Year Project Student (2021/2022) “Ultrasonically assisted fluid on CNC turning Machine”. |
Lai Xu Huan |
Final Year Project Student (2021/2022)
” Development of Tribo-Tester in High Temperature Environment” |
Wan Muhamad Syafiq bin Wan Rozali |
Final Year Project Student (2021/2022) “Fabrication oxide coating by pulsed anodizing”. |
|
Hassan Aizuddin Binti Ruhama |
Final Year Project Student (2021/2022)
“Influence of Trace Water in Nitrogen Environment on The Friction and Wear Stainless Steel “. |
Azrai Dhiyauddin Bin Zul Azri |
Final Year Project Student (2021/2022) ” Electroplating of composite coatings containing graphite particles”. |
|
|
Final Year Project Student (2020/2021) “Influence of Lubrication on the Efficiency of Forcedly Syncronized Differential Phase Transmitter”
|
|
|
Final Year Project Student (2020/2021) “Influence of Shaft Material on The Friction Behavior of Piano Bearing”
|
|
Hassan Aizuddin Bin Ruhama |
Final Year Project Student (2020/2021) “Influence of Trace Water in Nitrogen Environment on The Friction and Wear Stainless Steel”
|
|
|
Final Year Project Student (2020/2021) “Tribology Behavior of SUS304 Under High Temperature Condition”
|
|
Khairul Bariah Binti Hasmizol |
Final Year Project Student (2020/2021) “Development of Anodized Coating Method”
|
|
|
Final Year Project Student (2020/2021) “Comparison of Algorithm for Automatic Lapping Process of BAll-Screw Shaft”
|
|
Rashdan Azizan bin Idris |
Final Year Project Student (2020/2021) “Surface Texturing of Carbon Steel by Photochemical Machining”
|
|
Nurul Syahirah Binti Abdul Rahman |
Final Year Project Student (2020/2021) “Evaluating self-Lubricating of anode Oxide film on Aluminium Alloy Surface”
|
|
Mohd Zakir fathi Bin Hashimi |
Final Year Project Student (2019/2020) “Dry Sliding Wear Behavior of Fly Ash Anodic Composition Film”
|
|
Tan Eng Joo |
Final Year Project Student (2019/2020) “Forcedly Synchronized Differential Phase Transmitter”
|
|
Tan Chai Beng |
Final Year Project Student (2019/2020) “Development of Ultrasonic Effector”
|
|
Bock Eu Siin |
Final Year Project Student (2019/2020) “Enhancing the Voltage Output of Triboelectric NanoGenerator (TENG) by Implementing Surface Modification on The Tribo-Dielectric Surface” |
|
Muhammad Izzaire Bin Hasssan |
Final Year Project Student (2019/2020) “Ultrasonically Lapping of Ball Screw Shaft”
|
|
Loo Kun Zin |
Final Year Project Student (2019/2020) “Effect of Environmental Humidity on the Difference between Static and Kinetic Coefficient of Friction”
|
|
Jeevan Rao A/L Siva Rao |
Final Year Project Student (2019/2020) “Assembly of Tribotester”
|
|
Muhamad Haziq Bin Abdul Halim |
Final Year Project Student (2019/2020) “New Algorithm for Automatic Lapping Machine of Ball Screw Shaft”
|
|
Nurul Illiannie Binti Azman |
Final Year Project Student (2019/2020) “Effect of Internal Time on Friction Force of Light Load Bearing”
|
|
Tan Jiin Kuen |
Final Year Project Student (2019/2020) “Permeation Tube Method Humidifier”
|
|
Ahmad Ridhwan Bin kamel |
Final Year Project Student (2019/2020) “Tribological Characterization for Polyoxymethylene Reinforced by Oil Palm Empty Fruit Bunch (OPEFB) Natural Final”
|
|
Alif OmarBin Elias |
Final Year Project Student (2018/2019) “Effect of Ultrasonic Vibration In CNC Turning Machine” |
|
|
Final Year Project Student (2018/2019) “Influence of Trace Water in Gaseous Environment on Tribological Properties of Pure Fe and Staniless Steel “
|
|
Muhammad Saifulnizam Bin Mohd Yunus |
Final Year Project Student (2018/2019) “Tribological Characterization for Anodic Film Reinforced with Fly Ash Particles” |
|
Nuratika Shaheera binti Rahama |
Final Year Project Student (2018/2019) “Tribological Characterization of Textured UHMWPE by Photolithography” |
|
Syafreena Ezzany Binti Ismail |
Final Year Project Student (2018/2019) “Development of Automatic Lapping Machine for Ball Screw Shaft”
|
|
Siah Lee Sheng |
Final Year Project Student (2018/2019) “The Influence of Atmospheric Humidity on Sliding Properties of Polytetrafluoroethylene” |
|
Amirul Ashraff Bin Mat Noh |
Final Year Project Student (2018/2019) “Effect of Humidity on Hydrogenated and non-hydrogenated under Lubricated Condition”
|
|
Choo Tze Eu |
Final Year Project Student (2018/2019) “Tribological Characterization of Textured UHMWPE by Photolithography”
|
|
Shukri Nazri |
Final Year Project Student (2018/2019) “Tribological Characterization of Polyoxymethylene (POM) Reinforced by Oilpalm Empty Fruit Bunch (OPEFB)” |
|
Amirul Adha |
Final Year Project Student (2018/2019) “Multiple Lubricants with Ultrasonic Excitation” |
Tan Jia Wei |
Final Year Project Student (2017/2018) “Development of Ultrasonic Assisted Lapping Tool”
|
|
Leong Chee Hon |
Final Year Project Student (2017/2018) “Mirror Finishing of Spherical Surface”
|
|
Muhamad Aswad Bin Hussien |
Final Year Project Student (2017/2018) “Ultrasonic Exciter for cylindrical Grinding”
|
|
Muhammad Lutfhi Naim Bin Mohd Sofi |
Final Year Project Student (2017/2018) “Fabrication and Tribological Characterization of Hars Anodic Films on Aluminium Alloy”
|
|
Ahmad Nu`aim Bin Nohaimi |
Final Year Project Student (2017/2018) “Optimization in Lead Accuracy of Automotic Lapping Machine for Precision Ball Screw Shaft”
|
|
Aly Hefny Mahmoud Hefny |
Final Year Project Student (2017/2018) “The Effect of Ultrasonic Excited Lubricant on GrindingProcess”
|
|
Mohd Amirul Che Lah |
Final Year Project Student (2017/2018) “FAbrication and Tribological Characterization of Textured Aluminium Alloy by Using Photolithography”
|
|
Ikmal Danial Musa |
Final Year Project Student (2017/2018) “Wear Particle Generation in Adhesive Wear Mechanism”
|
|
Mohd Faimuzi Fahmi Mohd |
Final Year Project Student (2017/2018) “Adhesion Phenomena in Boundary Lubrication”
|
|
Yap Kian Kun |
Final Year Project Student (2016/2017) “Influence of Adsorbed Water on Adhesive Wear”
|
|
Chai Chee Yike |
Final Year Project Student (2016/2017) “Different Hardness Material”
Currently, work as Project Engineer at VS Industry Berhad |
|
Goh Kok Zhen |
Final Year Project Student (2016/2017) “Variation of Ultrasonic Excitation in Grinding Lubrication Characteristic” Currently, work as a Product Engineer at RK South Asia SDN BHD
|
|
Lim Chin Yee |
Final Year Project Student (2016/2017) “Humidity Effects on Light Load Bearings of Piano”
|
|
Kan Hao Nan |
Final Year Project Student (2016/2017) “Ultrasonic EXciter for Cylindrical Grinding” |
|
Omar Hefni Mahmod Hefni |
Final Year Project Student (2016/2017) “Automatic Lapping MAchine for Ball-Screw Shaft” |
|
See Hau Yee |
Final Year Project Student (2016/2017) “Ultrasonic Exciter Operating Frequency Controller” |
|
Sri Prakathiswaran Mohana Dass |
Final Year Project Student (2016/2017) “Analysis Algorithm for Adhesion in Sliding” |
|
Lai Wei Hang |
Final Year Project Student (2016/2017) “Development of a High-temperature Tribo-Tester” |
|
Abdul Hafiz bin Hassan |
Final Year Project Student (2015/2016) “An Optimization Program of Ultrasonic Exciter Amplifier” |
|
Azuwin Binti Ibrahim |
Final Year Project Student (2015/2016) “Ultrasonic Exciter for Cutting/Grinding Fluid” |
|
Muhammad Ainurrasyid Bin Mohd Syukri |
Final Year Project Student (2015/2016) “Development of Automatic Lapping Tools for Ball-Screw Shaft”
|
|
Muhammad Firdaus Bin Hapizan |
Final Year Project Student (2015/2016) “Lubrication of an Abrasive Grain with Ultrasonically Vibrated Fluid” |
|
Muhammad Hisyam Bin Rai |
Final Year Project Student (2015/2016) “Lubrication Assisted by Ultrasonic Lubrication” |
|
Patrick Lim Shen Yi |
Final Year Project Student (2015/2016) “Influence of Repeated Contact on Electrical Resistance”
|
|
Muhammad Fitri Bin Yahya |
Final Year Project Student (2014/2015) “Study on Aspherical Lens Mould Lapping”
|
|
Heng Chia Chia |
Final Year Project Student (2014/2015) “Adhesion Phenomena of a Screw Bolt”
|
|
Ahmad Syahmi Bin Abdul Aziz |
Final Year Project Student (2014/2015) “Study of Aspherical Lens Lapping”
|
|
Muhammad Hakim Bin jaafar |
Final Year Project Student (2014/2015) “WAter Adhesion on Metal”
|
EX-Internship
|
Nur Izzati Binti Moh Ridzuan |
Bachelor of Engineering Technology (hons.). in Tool and Die, University of Kuala Lumpur (Feb 2014 – June 2014) |
|
Tengku Nur Atiqah |
Bachelor of Engineering Technology (hons.). in Tool and Die, University of Kuala Lumpur (Feb 2014 – June 2014)
|
|
Mohammad Shukeri Bin Zainuddin |
Bachelor of Engineering Technology (hons.). in Tool and Die, University of Kuala Lumpur (Feb 2014 – June 2014) |