by faidhi | Aug 29, 2014 | Awards
One of the core members of the Tribology & Precision Machining i-Kohza, Dr Aung Lwin Moe, was present at the 3rd International Conference on Electronics, Mechatronics and Automation (ICEMA 2014), which was held at Flora Grand Hotel, Dubai, United Arab Emirates, beginning from 22nd August – 23rd August 2014.
Dr Aung presented his paper during the conference. The paper is titled “Experimental Study on the Determinants of Surface Finish in Automated Polishing of Mould”.
ICEMA is an event that focuses on the state of the art technologies pertaining to Electronics, Mechatronics and Automation. It was held as a workshop for the 4th International Workshop on Computer Science and Engineering-Summer (WCSE 2014), among other workshops such as ICAIT, ICEMA, ICOAA, ICCAD, ICSET, ICOSE and ICII 2014.
Please visit the ICEMA 2014 website for more details regarding the conference.
by faidhi | Aug 11, 2014 | Journal & Conference
The 3rd Malaysia-Japan Tribology Symposium, was held on 12-14 November 2014 as part of MJIIT-JUC Joint International Symposium 2014 (MJJIS 2014).
Schedule
| 12th November 2014 |
| 8.30am |
Registration |
Dewan Jumaah |
| 9.30am – 10.00am |
Opening ceremony |
Dewan Jumaah |
| 10.00am – 10.30am |
Industrial talk |
Dewan Jumaah |
| 10.30am – 11.10am |
Coffee break |
Dewan Besar |
| 11.10am – 12.50pm |
Tribo session 1: Materials 1 |
Bilik Kuliah 14 |
| 12.50pm – 2.00pm |
Lunch |
Dewan Besar |
| 2.00pm – 3.40pm |
Tribo session 2: Lubrication 1 |
Bilik Kuliah 14 |
| 3.40pm – 4.00pm |
Tea break |
IBS Banquet Hall, Level 12, Razak Tower |
| 4.00pm – 5.40pm |
Tribo session 3: Fundamentals and Applications |
Bilik Kuliah 14 |
| 8.00pm – 10.00pm |
MJIIT Dinner |
Intercontinental Hotel Kuala Lumpur |
| 13th November 2014 |
| 8.30am |
Registration |
Dewan Jumaah |
| 9.40am – 10.40am |
Keynote speech |
Dewan Jumaah |
| 10.40am – 11.00am |
Coffee break |
Dewan Besar |
| 11.00am – 12.50pm |
Special Symposium: Education of Tribology |
Bilik Kuliah 14 |
| 12.50pm – 2.00pm |
Lunch |
Dewan Besar |
| 2.00pm – 3.40pm |
Tribo session 4: Materials 2 |
Bilik Kuliah 14 |
| 3.40pm – 4.00pm |
Tea break |
IBS Banquet Hall, Level 12, Razak Tower |
| 4.00pm – 5.40pm |
Tribo session 5: Lubrication 2 |
Bilik Kuliah 14 |
| 14th November 2014 |
| 2.30pm – 3.30pm |
Bus ride to Palm Oil Miling Technology Center (POMTEC) |
Corus Hotel – POMTEC, Labu, Negeri Sembilan |
| 3.30pm – 5.00pm |
POMTEC visit |
POMTEC, Labu, Negeri Sembilan |
| 5.00pm – 6.00pm |
Bus ride to Kuala Lumpur |
POMTEC, Labu, Negeri Sembilan – Corus Hotel |
For the complete program (including the scheduled events for both MJJIS 2014 and MJTS 2014), please download the program (.pdf format). The file also contains valuable information, such as the map of Razak Tower, general map of the UTMKL campus and a region map highlighting the location of UTMKL campus and KLCC.
Lecture(s)
“Education of Tribology”, brought to you by invited speakers
1. “Introduction to MYTRIBOS” by Assoc Prof Dr Mariyam Jameelah bt Ghazali
2. “Educational activities in the Japanese Society of Tribologists” by Prof Dr Shinya Sasaki
3. “Tribology Education in Malaysia” by Assoc Prof Dr Salmiah Kasolang
4. “Innovative experience learning event through problem-solving game ‘Science of Friction & Puzzles: Can You Save the Earth?'” by Dr Alan Hase
Presentations
| Session 1 – Materials 1 |
| Noel Lo |
Cavitation erosion of diamond like carbon coating tested in deionized water |
Tokyo University of Science |
| Moinuddin Quazi |
Adhesion of PVD multilayer ceramic coating on AA7075-T6 aerospace alloy |
University of Malaya |
| Masatoshi Arai |
Realization of low frictional property of TiB2-MoS2 composite films with low MoS2 content
|
Tokai University |
| Mubashir Gulzar |
Effect of piston material on piston skirt lubrication at initial engine start-up speed |
University of Malaya |
| Hatsuhiko Usami |
Tribological properties of molybdenum di-sulfide dispersed stainless steel using surface plastic flow process
|
Meijo University |
| Session 2 – Lubrication 1 |
| Syahrullail Samion |
The evaluation of modified surface curvature cup lubricated with palm kernel |
Universiti Teknologi Malaysia |
| Tomoaki Iwai |
Relation between tribological propertiesof rubber and surface roughness parameters under oil lubrication
|
Kanazawa University |
| Diyar I. Ahmed |
Friction evaluation of eco-friendly bio lubricant |
Universiti Teknologi MARA |
| N.W.M. Zulkifli |
Biobased lubricants: gearing up as engine oil for a green world |
University of Malaya |
| Session 3 – Fundamentals and Applications |
| Yasuo Matsuzaki |
In-situ observation of plastic flow behaviour during scuffing by long time and short interval observation system
|
Kyushu University |
| Mariyam Jameelah Ghazali |
Effect of second phase morphology on wear resistance of Fe-TiC composites |
Universiti Kebangsaan Malaysia |
| Kenji Kuraishi |
Personal authentication by comparison of ground reaction forces during walkin |
Kanazawa University |
| S.A. Adeleke |
Thin surface layers of iron-based alloys deposited by TIG hardfacing
|
International Islamic University of Malaysia |
| Zaid Subhi |
Analysis on the mechanism of humidity to influence the very early stage of sliding under different load
|
Malaysia-Japan International Institute of Technology |
| Session 4 – Materials 2 |
| Hikaru Okubo |
Frictional properties of DLC films in hydrogen conditions |
Tokyo University of Science |
| Kanae Yamamoto |
Friction properties of laminated composite materials of α-TCP-filled poly (vinyl alcohol) hydrogels
|
Kanazawa University |
| Noor Ayuma Mat Tahir |
The effect on friction coefficient and wear rate of palm kernel activated carbon-epoxy (PKAC-E) composite at different temperatures
|
Universiti Teknikal Malaysia Melaka |
| H.A. Hassan |
Potentials of bio-adhesive effects on banana leaves for elevated temperature applications
|
Universiti Kebangsaan Malaysia |
| Lei Zhang |
Investigation of wear and wear particles from shelf-aged crosslinked UHMWPE under different contact pressures
|
Kyushu University |
| Session 5 – Lubrication 2 |
| M. Kamel Wan Ibrahim |
The tribological properties of Leucaena leucocephala seed oil as bio-lubricant
|
Universiti Malaysia Sabah |
| Kazuyuki Yagi |
Hydrodynamic lubrication mechanism of textured surfaces based on moment balance |
Kyushu University |
| Arslan Ahmed |
Effects of cam shaft speed and lubricant temperature on lubricant film thickness between cam/tappet contact
|
University of Malaya |
| Syahrullail Samion |
Alternating metal forming lubricant: mineral oil-based to palm oil-based lubricant
|
Universiti Teknologi Malaysia |
| Mohd Zulfadhli b Shaari |
Tribological characteristic of palm oil bio-lubricant modified of titanium oxide nanoadditives
|
Universiti Teknologi MARA |
Excellent Research Student Award Recipients
1. Moinuddin Quazi, University of Malaya, “Adhesion of PVD multilayer ceramic coating on AA7075-T6 aerospace alloy”
2. Kanae Yamamoto, Kanazawa University, “Friction properties of laminated composite materials of α-TCP-filled poly (vinyl alcohol) hydrogels”
3. Zaid Ali Subhi, Malaysia-Japan International Institute of Technology, “Analysis on the mechanism of humidity to influence the very early stage of sliding under different load”
Organizer
Tribology and Precision Machining Research Laboratory (TriPreM), Malaysia-Japan International Institute of Technology (MJIIT), University Teknologi Malaysia Kuala Lumpur (UTMKL)
Participating organizations
Malaysian Tribology Society (MYTRIBOS) (http://www.mytribos.org/)
Japanese Society of Tribologists (JAST) (http://www.tribology.jp/indexe.htm)
by faidhi | Jun 16, 2014 | Awards
TriPreM wishes to congratulate Mr Sangeeth Suresh on receiving the Best Presenter Award at the International Conference on Industrial Engineering and Applications (ICIEA 2014).
ICIEA 2014 was an extended workshop of International Conference on Future Computer and Communication 2014 (ICFCC 2014) in Sydney, Australia on May 29-30, 2014.
The website of the conference can be found by clicking this link.
by faidhi | Apr 28, 2014 | Journal & Conference
The 7th International Workshop on Plasma Application & Hybrid Functionally Materials, in tandem with the 21st Institute of Applied Plasma Science (IAPS) Annual Meeting was realized at Hong Kong Polytechnic University, with the main sponsors being the Hong Kong Polytechnic University, and co-sponsored by Malaysia-Japan International Institute of Technology. The sponsors also received co-operation from Osaka University, Kyungsung University and Dalian University of Technology. The event was held for four days, from 7th March 2014 until 10th March 2014.
Dr Aung Lwin Moe was present for the event, presenting two papers in his collaborative research with local and international researchers. In addition, Dr Aung also attended the IAPS Panel Discussions, Hong Kong Polytechnics University laboratories and the post conference tours.
This event ended with fruitful discussions, exciting floating Jumbo Dinners and visits to tourist attractions.
by faidhi | Dec 17, 2013 | Journal & Conference
TriPreM wishes to congratulate Assoc Prof Nur’azah Abdul Manaf on receiving International Conference on Science and Engineering 2013 (ICSE 2013)′s Best Presenter Award, for her stellar presentation on her “Application of Reproducing Kernels to Analyze the Survival Data of HIV Positive Patients” research.
More details of TriPreM attending the event here, and link to ICSE 2013’s website here.
