{"id":70,"date":"2012-09-20T15:15:34","date_gmt":"2012-09-20T07:15:34","guid":{"rendered":"http:\/\/mjiit.utm.my\/dept-structure-materials\/?page_id=70"},"modified":"2023-07-10T11:17:06","modified_gmt":"2023-07-10T03:17:06","slug":"about-us","status":"publish","type":"page","link":"https:\/\/mjiit.utm.my\/research-tribology\/about-us\/","title":{"rendered":"TriPreM Members"},"content":{"rendered":"

Academic Staff<\/strong><\/span><\/p>\n

 <\/p>\n

Members<\/strong><\/span><\/p>\n

\u200b<\/p>\n\n\n\n\n\n\n
\"fukuda\"<\/a><\/td>\nKanao Fukuda<\/a><\/strong>, Professor, Head of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology<\/em><\/td>\n<\/tr>\n
 \"\"<\/td>\nNur\u2019azah Abdul Manaf<\/a><\/strong>, Dr, Associate Professor, Malaysia-Japan International Institute of Technology<\/em><\/td>\n<\/tr>\n
\"\u9854\u5199\u771f\"<\/a><\/td>\nJun Ishimatsu<\/a>, <\/strong>Dr, Senior Lecturer, Malaysia-Japan International Institute of Technology<\/em><\/p>\n

 <\/td>\n<\/tr>\n

\"\"<\/a><\/td>\nShahira Liza Kamis<\/a>, <\/strong>Dr, Senior Lecturer, Malaysia-Japan International Institute of Technology<\/em><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Associate Members<\/strong><\/span><\/p>\n

1 – Takehiro Morita<\/a><\/strong>, Assistant Professor, Kyushu University, Japan<\/em>.<\/p>\n

2 – Syahrullail Samion<\/a><\/strong>, Ph.D, Associate Professor, Universiti Teknologi Malaysia (UTM)<\/em>.<\/p>\n

3 – Dr. Zahriddin Mumimov, PhD, Senior Lecturer, Nilai University.<\/p>\n

 <\/p>\n

Postdoctoral Researcher<\/strong><\/span><\/p>\n\n\n\n
\"\"<\/a><\/td>\nNoor Ayuma Binti Tahir<\/b><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n


\nAssistant Research Officer
\n<\/strong><\/span><\/p>\n\n\n\n
\"\"<\/a><\/td>\nNur Rasyidah Bt. Rusli<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n
\"\"<\/a><\/td>\nKua Loan Kiat<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Students<\/strong><\/span><\/p>\n

 <\/p>\n

Postgraduate Students (PhD)<\/strong><\/span><\/p>\n\n\n\n\n\n
\"dalilah\"<\/a><\/td>\nNoor Dalilah bt A Manaf, <\/strong>“Physical Model of Adhesive Wear Influence by Atmospheric Humidity”<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nNor Ashwani Abd Rahim, <\/strong>“Photochemical Texturing Of Carbon Steel Surface for Tribological Optimization”<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nNur Amanina Damira Bt Muhalim, <\/strong>“Oil Palm Empty Fruit Bunch (OPEFB) Fibre Reinforced Polyoxymethylene (POM) Composite Material”<\/em><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Postgraduate Students (Masters)<\/strong><\/span>
\n <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\"\"<\/a><\/td>\nNur Hidayah Binti mohamad,<\/strong> “Biotribological Chracterization of UHMWPE Composite”.<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nMuhammad Bustami Bin A RAzak,<\/strong> “Tribological Evaluation of Composite Ni-Based Coating Under Grease Lubrication”.<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nBakhit Irfan Bin Yusoff,<\/strong> “Improvement Lubricity of Grease on Rolling Bearing”.<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nNur Adilah Binti Mohd Rawian,<\/strong> “Tribological characterization of heat-treated DLC coated particles reinforced oxide coating”.<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nFarra Adeera Binti Omar,<\/strong> “Hydroxyapatite composite coating for titanium implants”<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nAmirah binti Basir,<\/strong> “Tribological Performance of Multi-Shape Textured Surfaces in Mechanical Applications”<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nNur Aszreen Binti Zulkifli<\/strong>,<\/strong> ” Tribological Characterization of DLC Coated Particles Reinforced Oxide Coating” <\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nIkmal Alif Bin Sukri<\/strong>,<\/strong> ” Design, Testing, and Analysis of <\/em>Differential Phase Transmitter”<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nNur Afieqah Bt Md. Ghazazi, <\/strong>“Influence of Pulse Anodizing on The Structure of Composite Oxide Coating”<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nAfiqah bt Abdul Rahman, <\/strong>“Resin Material Used for Permeation Tube Method Humidifier”
\n<\/em><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nSharifah Khadijah, “I<\/em>mproving Tribological Properties of UHMWPE Biomaterials by Surface Energy Modification”<\/em><\/strong><\/td>\n<\/tr>\n
\"\"<\/a><\/td>\nHong Wei Chee, “Influences of Sliding Speed on the Friction Force due to Adsorbed Water”<\/em><\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Undergraduate Students<\/strong><\/span><\/p>\n

 <\/p>\n

Ex-Staff Member<\/strong><\/p>\n

 <\/p>\n\n\n\n
\n

\"\"<\/a><\/p>\n

Zahriddin Mumimov<\/p>\n<\/td>\n

\n

Senior Lecturer<\/strong><\/p>\n

Malaysia-Japan International Institute Technology<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n
\n

\"\"<\/a><\/p>\n

Dr Aung Lwin Moe<\/p>\n<\/td>\n

\n

Senior Lecturer (February 2012 – February 2016)<\/strong><\/p>\n

Malaysia-Japan International Institute Technology<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\"\"<\/a><\/p>\n

Noor Maniza Binti Othman<\/td>\n

\n

Research Assistant (August 2015 – February 2016)<\/strong><\/p>\n

Malaysia-Japan International Institute Technology<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\"\"<\/a><\/p>\n

Nurul Zariah Binti Jakariah@Zakaria<\/td>\n

\n

Research Assistant (September 2018 – February 2019)<\/strong><\/p>\n

Malaysia-Japan International Institute Technology<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\"\"<\/a><\/p>\n

Hazfarahin Binti Md. Ali<\/td>\n

\n

Assistant Research Officer (March 2017 – May 2019)<\/strong><\/p>\n

Malaysia-Japan International Institute Technology<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Ex- Postgraduate Students<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

\"\"<\/a><\/p>\n

Zaid Ali Subhi<\/p>\n<\/td>\n

\n

Graduated Phd Student (Mei 2021)<\/strong><\/p>\n

“Strengthening Mechanical and Tribological Characterization of Anodic Oxide Film on Aluminium Alloy”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Syazwani Binti Mohammad<\/p>\n<\/td>\n

\n

Graduated Master Student (Mei 2021)<\/strong><\/p>\n

“Strengthening Mechanical and Tribological Characterization of Anodic Oxide Film on Aluminium Alloy”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Nur Hidayah Binti Shahemi<\/p>\n<\/td>\n

\n

Graduated Master Student (Mac 2020)<\/strong><\/p>\n

“Failure Analysis of Retrieved UHMWPE Acetabular for Hip Replacement and Modification & Biotribological Behavior of UHMWPE Composite for Biomedical Applications”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ammar Hossam Aboubakrelseddik Abouelezz<\/p>\n<\/td>\n

\n

Graduated Master Student (Mac 2019)<\/strong><\/p>\n

“Development of Lapping Plate Evaluation System (LAPES)”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Faidhi Bin Mohd Radzi<\/p>\n<\/td>\n

\n

Graduated Master Student (Mac 2018)<\/strong><\/p>\n

“Influence of Humidity on Tribological Properties of Miniature Ball Bearings”<\/em><\/p>\n

 <\/p>\n

Currently working at NSK Ltd. JApan<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ooi Ee Lee<\/p>\n<\/td>\n

\n

Graduated Master Student (May 2018)<\/strong><\/p>\n

“Elucidation of Lapping Plate Characteristic to Its Lapping Performance and Finished Product Qualities”<\/em><\/p>\n

 <\/p>\n

Currently Working as Quality Management Engineer at OARAM Opto Semiconductors (Malaysia) SDN BHD.<\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Sangeeth Suresh<\/p>\n<\/td>\n

\n

PhD Student<\/strong><\/p>\n

“Study on The Inital Cutting Tool Contact Mechanism in Precision Machining using ABAQUs”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ahmad Aizudding Bin Abdul Aziz<\/p>\n<\/td>\n

\n

PhD Student<\/strong><\/p>\n

“Fundamental Study of Asperical Lens Mold”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Faiz Bin Wahab<\/p>\n<\/td>\n

\n

Master Student<\/strong><\/p>\n

“Study of New Lapping Technology for Asperical Lens”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Ex-Undergraduate Students<\/strong><\/p>\n\n\n\n
\n

\"\"<\/a>Lutfir Rahman Bin Mohd Izani<\/p>\n<\/td>\n

\n

Final Year Project Student (2021\/2022)<\/strong><\/p>\n

 “Influences of Wave Parameters on the efficiency of a Forced Synchronized Differential Phase Reducer”.<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
\n

\"\"<\/a>Lee Jia Hong  <\/p>\n<\/td>\n

\n

Final Year Project Student (2021\/2022)<\/strong><\/p>\n

 “Ultrasonically assisted fluid on CNC turning Machine”.<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n
\"\"<\/a><\/p>\n

Lai Xu Huan<\/p>\n<\/td>\n

Final Year Project Student (2021\/2022)<\/strong><\/em><\/p>\n

” Development of Tribo-Tester in High Temperature Environment”<\/em><\/td>\n<\/tr>\n<\/tbody>\n

\"\"<\/a><\/p>\n

Wan Muhamad Syafiq bin Wan Rozali<\/td>\n

\n

Final Year Project Student (2021\/2022)<\/strong><\/p>\n

“Fabrication oxide coating by pulsed anodizing”.<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n


\n\"\"<\/a><\/p>\n

Hassan Aizuddin Binti Ruhama<\/p>\n<\/td>\n

Final Year Project Student (2021\/2022)<\/strong> <\/em><\/p>\n

“Influence of Trace Water in Nitrogen Environment on The Friction and Wear Stainless Steel “.<\/em><\/td>\n<\/tr>\n<\/tbody>\n

\"\"<\/a><\/p>\n

Azrai Dhiyauddin Bin Zul Azri<\/p>\n<\/td>\n

\n

Final Year Project Student (2021\/2022)<\/strong><\/p>\n

” Electroplating of composite coatings containing graphite particles”.<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

\"\"<\/a>Kua Loan Kiat<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Influence of Lubrication on the Efficiency of Forcedly Syncronized Differential Phase Transmitter”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a>Ho Mi Zhi<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Influence of Shaft Material on The Friction Behavior of Piano Bearing”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Hassan Aizuddin Bin Ruhama<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Influence of Trace Water in Nitrogen Environment on The Friction and Wear Stainless Steel”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a>Henry Siam Jian Hong<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Tribology Behavior of SUS304 Under High Temperature Condition”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Khairul Bariah Binti Hasmizol<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Development of Anodized Coating Method”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a>Muhammad Zaid Bin Malek<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Comparison of Algorithm for Automatic Lapping Process of BAll-Screw Shaft”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Rashdan Azizan bin Idris<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Surface Texturing of Carbon Steel by Photochemical Machining”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Nurul Syahirah Binti Abdul Rahman<\/p>\n<\/td>\n

\n

Final Year Project Student (2020\/2021)<\/strong><\/p>\n

“Evaluating self-Lubricating of anode Oxide film on Aluminium Alloy Surface”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Mohd Zakir fathi Bin Hashimi<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Dry Sliding Wear Behavior of Fly Ash Anodic Composition Film”<\/em><\/p>\n

 <\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Tan Eng Joo<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Forcedly Synchronized Differential Phase Transmitter”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Tan Chai Beng<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Development of Ultrasonic Effector”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Bock Eu Siin<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Enhancing the Voltage Output of Triboelectric NanoGenerator (TENG) by Implementing Surface Modification on The Tribo-Dielectric Surface”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Izzaire Bin Hasssan<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Ultrasonically Lapping of Ball Screw Shaft”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Loo Kun Zin<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Effect of Environmental Humidity on the Difference between Static and Kinetic Coefficient of Friction”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Jeevan Rao A\/L Siva Rao<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Assembly of Tribotester”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhamad Haziq Bin Abdul Halim<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“New Algorithm for Automatic Lapping Machine of Ball Screw Shaft”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Nurul Illiannie Binti Azman<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Effect of Internal Time on Friction Force of Light Load Bearing”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Tan Jiin Kuen<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Permeation Tube Method Humidifier”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ahmad Ridhwan Bin kamel<\/p>\n<\/td>\n

\n

Final Year Project Student (2019\/2020)<\/strong><\/p>\n

“Tribological Characterization for Polyoxymethylene Reinforced by Oil Palm Empty Fruit Bunch (OPEFB) Natural Final”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Alif OmarBin Elias<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Effect of Ultrasonic Vibration In CNC Turning Machine”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a>Ikmal Alif Bin ahmad Sukri<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Influence of Trace Water in Gaseous  Environment on Tribological Properties of Pure Fe and Staniless Steel “<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Saifulnizam Bin Mohd Yunus<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Tribological Characterization for Anodic Film Reinforced with Fly Ash Particles”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Nuratika Shaheera binti Rahama<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Tribological Characterization of Textured UHMWPE by Photolithography”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Syafreena Ezzany Binti Ismail<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Development of Automatic Lapping Machine for Ball Screw Shaft”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Siah Lee Sheng<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“The Influence of Atmospheric Humidity on Sliding Properties of Polytetrafluoroethylene”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Amirul Ashraff Bin Mat Noh<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Effect of Humidity on Hydrogenated and non-hydrogenated under Lubricated Condition”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Choo Tze Eu<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Tribological Characterization of Textured UHMWPE by Photolithography”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Shukri Nazri<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Tribological Characterization of Polyoxymethylene (POM) Reinforced by Oilpalm Empty Fruit Bunch (OPEFB)”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Amirul Adha<\/p>\n<\/td>\n

\n

Final Year Project Student (2018\/2019)<\/strong><\/p>\n

“Multiple Lubricants with Ultrasonic Excitation”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\"\"<\/a><\/p>\n

Tan Jia Wei<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Development of Ultrasonic Assisted Lapping Tool”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Leong Chee Hon<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Mirror Finishing of Spherical Surface”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhamad Aswad Bin Hussien <\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Ultrasonic Exciter for cylindrical Grinding”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Lutfhi Naim Bin Mohd Sofi<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Fabrication and Tribological Characterization of Hars Anodic Films on Aluminium Alloy”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ahmad Nu`aim Bin Nohaimi<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Optimization in Lead Accuracy of Automotic Lapping Machine for Precision Ball Screw Shaft”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Aly Hefny Mahmoud Hefny<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“The Effect of Ultrasonic Excited Lubricant on GrindingProcess”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Mohd Amirul Che Lah<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“FAbrication and Tribological Characterization of Textured Aluminium Alloy by Using Photolithography”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ikmal Danial Musa<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Wear Particle Generation in Adhesive Wear Mechanism”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

 <\/p>\n

Mohd Faimuzi Fahmi Mohd<\/p>\n<\/td>\n

\n

Final Year Project Student (2017\/2018)<\/strong><\/p>\n

“Adhesion Phenomena in Boundary Lubrication”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Yap Kian Kun<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Influence of Adsorbed Water on Adhesive Wear”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Chai Chee Yike<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Different Hardness Material”<\/em><\/p>\n

 <\/p>\n

Currently, work as Project Engineer at VS Industry Berhad<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Goh Kok Zhen<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Variation of Ultrasonic Excitation in Grinding Lubrication Characteristic”<\/em><\/p>\n

Currently, work as a Product Engineer at RK South Asia SDN BHD<\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Lim Chin Yee<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Humidity Effects on Light Load Bearings of Piano”<\/em><\/p>\n

 <\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Kan Hao Nan<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Ultrasonic EXciter for Cylindrical Grinding”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Omar Hefni Mahmod Hefni<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Automatic Lapping MAchine for Ball-Screw Shaft”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

See Hau Yee<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Ultrasonic Exciter Operating Frequency Controller”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Sri Prakathiswaran Mohana Dass<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Analysis Algorithm for Adhesion in Sliding”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Lai Wei Hang<\/p>\n<\/td>\n

\n

Final Year Project Student (2016\/2017)<\/strong><\/p>\n

“Development of a High-temperature Tribo-Tester”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Abdul Hafiz bin Hassan<\/p>\n<\/td>\n

\n

Final Year Project Student (2015\/2016)<\/strong><\/p>\n

“An Optimization Program of Ultrasonic Exciter Amplifier”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Azuwin Binti Ibrahim<\/p>\n<\/td>\n

\n

Final Year Project Student (2015\/2016)<\/strong><\/p>\n

“Ultrasonic Exciter for Cutting\/Grinding Fluid”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Ainurrasyid Bin Mohd Syukri<\/p>\n<\/td>\n

\n

Final Year Project Student (2015\/2016)<\/strong><\/p>\n

“Development of Automatic Lapping Tools for Ball-Screw Shaft”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Firdaus Bin Hapizan<\/p>\n<\/td>\n

\n

Final Year Project Student (2015\/2016)<\/strong><\/p>\n

“Lubrication of an Abrasive Grain with Ultrasonically Vibrated Fluid”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Hisyam Bin Rai<\/p>\n<\/td>\n

\n

Final Year Project Student (2015\/2016)<\/strong><\/p>\n

“Lubrication Assisted by Ultrasonic Lubrication”<\/em><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Patrick Lim Shen Yi<\/p>\n<\/td>\n

\n

Final Year Project Student (2015\/2016)<\/strong><\/p>\n

“Influence of Repeated Contact on Electrical Resistance”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Muhammad Fitri Bin Yahya<\/p>\n<\/td>\n

\n

Final Year Project Student (2014\/2015)<\/strong><\/p>\n

“Study on Aspherical Lens Mould Lapping”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Heng Chia Chia<\/p>\n<\/td>\n

\n

Final Year Project Student (2014\/2015)<\/strong><\/p>\n

“Adhesion Phenomena of a Screw Bolt”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

\n

\"\"<\/a><\/p>\n

Ahmad Syahmi Bin Abdul Aziz<\/p>\n<\/td>\n

\n

Final Year Project Student (2014\/2015)<\/strong><\/p>\n

“Study of Aspherical Lens Lapping”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
\n

\"\"<\/a><\/p>\n

Muhammad Hakim Bin jaafar<\/p>\n<\/td>\n

\n

Final Year Project Student (2014\/2015)<\/strong><\/p>\n

“WAter Adhesion on Metal”<\/em><\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

EX-Internship<\/strong><\/p>\n

 <\/p>\n\n\n\n\n\n\n\n
 <\/p>\n

Nur Izzati Binti Moh Ridzuan<\/p>\n<\/td>\n

\n

Bachelor of Engineering Technology (hons.). in Tool and Die, University of Kuala Lumpur<\/strong><\/p>\n

(Feb 2014 – June 2014)<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n

 <\/p>\n

Tengku Nur Atiqah<\/p>\n<\/td>\n

\n

Bachelor of Engineering Technology (hons.). in Tool and Die, University of Kuala Lumpur<\/strong><\/p>\n

(Feb 2014 – June 2014)<\/p>\n

 <\/td>\n<\/tr>\n<\/tbody>\n

 <\/p>\n

Mohammad Shukeri Bin Zainuddin<\/p>\n<\/td>\n

\n

Bachelor of Engineering Technology (hons.). in Tool and Die, University of Kuala Lumpur<\/strong><\/p>\n

(Feb 2014 – June 2014)<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

Academic Staff   Members \u200b Kanao Fukuda, Professor, Head of Tribology and Precision Machining Research Laboratory, Department of Mechanical Precision Engineering, Malaysia-Japan International Institute of Technology   Nur\u2019azah Abdul Manaf, Dr, Associate Professor, Malaysia-Japan International Institute of Technology Jun Ishimatsu, Dr, Senior Lecturer, Malaysia-Japan International Institute of Technology   Shahira Liza Kamis, Dr, Senior Lecturer, […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","ngg_post_thumbnail":0,"footnotes":""},"class_list":["post-70","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/pages\/70","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/comments?post=70"}],"version-history":[{"count":302,"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/pages\/70\/revisions"}],"predecessor-version":[{"id":6683,"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/pages\/70\/revisions\/6683"}],"wp:attachment":[{"href":"https:\/\/mjiit.utm.my\/research-tribology\/wp-json\/wp\/v2\/media?parent=70"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}