Conferences

2017:

 

2016:
  • Kuheli Mondal (Das), Aminudin Bin Hj. Abu, Nozomu Hamada, “An Active Noise Control Algorithm using All-Pass Filtered-X LMS Algorithm without Secondary Path Identification” , MJJIC International confarance,2016.

  • Saurav Das , Toh Hoong Thiam, Aminudin Bin Hj.Abu, Saikat Das, Kuheli Mondal,”Fluid Structure Interaction of Straight through Labyrinth Seal”,MJJIC International confarance,2016.

  • Saikat Das, Toh Hoong Thiam, Aminudin Bin. Hj. Abu, Saurav Das, Kuheli Mondal, Lee Kee Quen,”A Preliminary Numerical Study of High Speed Compressible Flow around a Solid Triangular Prism”, MJJIC International confarance,2016.
2015:
  • Oo Kyaw Nyein, Aminudin Bin Abu, Aung Lwin Moe and Asnizah Sahekhani, “Experimental Modal Analysis of Vehicle Exhaust System to Determine Hanger Location Using Root Mean Square Value” 2015 Malaysia-Japan Joint International Conference (MJJIC2015),Ube, Yamaguchi, Japan.
  • Aung Lwin Moe, B. A Aminudin, Yin Thu Win and Sanda Pyae Sone,“Experimental Modal Analysis of Self-Excited Vibration in Developed Lapping Tools” The tenth International Symposium on Applied Plasma Sciences 2015 (ISAP’15), Nara, Japan.
  • Azella Aziz Wong, B. A Aminudin, S. Mansor, A. Anuar , H. M. Y. Norfazrina and N.M.R, Raihan,”Acoustics Mode Analysis of Automobile Cabin”, The tenth International Symposium on Applied Plasma Sciences 2015 (ISAP’15), Nara, Japan.
  • M.R, Raihan, B. A Aminudin, Aung Lwin Moe, H. M. Y. Norfazrina,”Modal Investigation Based on Aluminum Alloy Mass Modification’, The tenth International Symposium on Applied Plasma Sciences 2015 (ISAP’15), Nara, Japan.
  • M. Y. Norfazrina, P. Muhammad, B. A Aminudin, N.M.R, Raihan,  A. W. Azella,”  Two-step Methodology of System Identification for Large Nonlinear System”, The tenth International Symposium on Applied Plasma Sciences 2015 (ISAP’15), Nara, Japan.
  • A. H. Roslan, M. Z. Hassan, Z. A. Rasid, S. A. Zaki, Y. Daud, S. Aziz, S. Sarip and Z. Ismail,Mechanical Properties of Bamboo Reinforced Epoxy Sandwich Structure Composites”, International Conference on Mechanical Engineering Research (ICMER 2015) at Kuantan, Pahang.
  • Zainudin A Rasid,Abdul Malek Wahab, “A Review on the Parametric Instability of Shafts Interconnected Through Joint”2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET2015), Bali, Indonesia.
  • Oo Kyaw Nyein,Aminudin Abu ,Aung Lwin Moe, “Numerical Analysis of Vehicle Exhaust System to Determine Hanger Location Using Root Mean Square Valu” 2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET2015), Bali, Indonesia.
  • Norfazrina Mohd Yatim,Pauziah Muhamad,Aminudin Abu, Abdul Malek Wahab, Nurulfateha Raihan Bt Mohd Radzi “Application of Conditioned Reverse Path Method to Large MultiDegree-Of-Freedom Nonlinear Structure”,2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET2015), Bali, Indonesia.
  • Aung Lwin Moe,Muhammad Faiz Wahab,Ari Legowo,Zulkifli Yaacob,Aminudin Abu,”Development of Automated Parallel Parking System in Small Mobile Vehicle”,2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET2015), Bali, Indonesia.
  • Siti Amni Husna Roslan,Zainudin A Rasid,”The Natural Fibre Composites Based on Bamboo Fibres: a Review”,2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronic Engineering Technology International Conference (AR4MET2015), Bali, Indonesia.
2014:
  • “Investigation of Sensitivity Effect Based on Mass and Stiffness Modification in Automobile Crankshaft”,2014 1st International Conference on Advanced Material and Structural Mechanical Engineering,Je-ju Island, Korea.
  • “Sound from High Reynolds Number Flow Over Bluff Bodies”, Aerotech V Conference 2014,Furama Hotel,Kuala Lumpur.
  • “Conditioned and Orthogonalised Reverse Path Nonlinear Methods on Multi-Degree-of-Freedom System”,2014 1st International Conference on Advanced Material and Structural Mechanical Engineering,Je-ju Island, Korea.
  • “Analysis of Baffle Effect for Measuring Transmission Loss”,2014 1st International Conference on Advanced Material and Structural Mechanical Engineering,Je-ju Island, Korea.
  • “A Study on Structural System Identification and damage detection for Free Vibration Response using the Wavelet Transform”,2014 1st International Conference on Advanced Material and Structural Mechanical Engineering,Je-ju Island, Korea 
2013:
  • Hanida Abdullah, Aminudin Abu, Pauziah Muhamad, Aung Lwin Moe, Asnizah Sahekhaini and Lee Kee Quen,”A Prediction of Noise Reduction of Exhaust Muffler System”, The Fourth International Conference on Science and Engineering (ICSE 201 3), Yangon, Myanmar.
  • Saurav Das,Dr Toh Hoong Thiam,”Mechanical growth of Labyrinth Seal”, ICME’13, 4th International Conference on Mechanical and Manufacturing Engineering, Kuala Lumpur, December 2013.
  • N. Raihan Radzi, B. A Aminudin, M. Hanif Mat,”Simulation and Optimization Studies of Front and Rear Upright in a Suspension System Under Static load Conditions”, MJIIT-JUC Joint International Symposium 2013, Tokyo, Japan.
  • Lee Kee Quen, Aminudin Abu, Naomi Kato, Pauziah Muhamad, Asnizah Sahekhaini, Hanida Abdullah,”Experimental Study of Helical Strakes in Suppressing VortexInduced Vibration of Flexible cylinder”, MJIIT-JUC Joint International Symposium 201 3, Tokyo, Japan.
  • Aung Lwin Moe, Kanao Fukuda and Aminudin Bin Abu,”Influences Of Orthogonal Lapping And Its Angle Effect On Mirror-Like Surface Finishing Process”, MJIIT-JUC Joint International Symposium 201 3, Tokyo, Japan.
  • Mohammad Amiruddin bin Ismail, Pauziah binti Muhamad and Aminudin bin Abu,Modelling Behaviour and Bouc-wen Model for Magneto Rheological Motorcycle Suspension System”, Aun/Seed-Net Regional Conference on Mechanical and Manufacturing Engineering (RCMME 201 3), Kuala Lumpur, Malaysia.
  • M. Amiruddin Ismail, Pauziah Muhamad and Aminuddin Abu,”Magneto Rheological for Motorcycle Suspension Using Bouc-wen Model”, 2nd International Conference On Recent Advances In Automotive Engineering & Mobility Research (ReCAR 2013).
  • Aung Lwin Moe, Kano Fukuda, Aminudin bin Abu, “An Investigation of Lapping Charcteristics for Mirror-Like Finish using A Lath With Linear Motor”, 201 3 International Conference on Advances in Mechanical and Manufacturing Engineering (ICAME2 201 3), Hotel Istana, Kuala Lumpur Malaysia.
  • M. Amiruddin Ismail, Pauziah Muhamad and Aminuddin Abu,”Magneto Rheological for Motorcycle Suspension Using Bouc-wen Model”, 201 3 International Conference on Kinematics, Mechanics of RigidBodies, and Materials (KINEMATICS 201 3), Arya Duta Hotel Jakarta, Indonesia.
  • M.S. Noorazizi and B.A. Aminudin,”Systematic FEA Study Of Vehicle Exhaust System Hanger Location Using ADDOFD Method”, 201 3 5th International Conference on Mechanical and Electrical Technology (ICMET 201 3), Chengdu, China.
  • MN Abdul Rani, H. Ouyang, MA Yunus and B.A Aminudin,”Model Updating For A Thin Steel Sheet Welded Structure”, 201 3 20th International Congress on Sound & Vibration (ICSV2013), Bangkok, Thailand.
2012:
  • Hanida Abdullah, Aminudin Abu, Pauziah Muhammad, Asnizah Sahekhaini, Lee Kee Quen,”On Theoretical of Transmission Loss in Exhaust Muffler System”, 201 2 International Conference on Bio-Material and Bio-Engineering (ICBB201 2) , Shantin, Hong Kong.
  • Lee Kee Quen, Aminudin Abu, Pauziah Muhammad,”Investigation of Wide Range of Flow Around Circular Using Turbulence Model”, 201 2 International Conference on Enviromental and Materials Engineering (EME 2012), Seoul, Korea.
  • B. A. Aminudin, M. Khairul Khalid, Keequen Lee, M. Amirudin Ismail,”Reduction of Vibration and Noise in Air-Compressor System Using Design of Experiment Method”, 201 2 International Conference on Advances in Materials Science and Engineering (AMSE 2012), Bangkok, Thailand.
  • S. Asnizah, M. Pauziah, B. A Aminudin, A. Hanida, J.Y. Lee,”Damage Detection in Static Beams via Wavelet-Based Technique”, 201 2 International Conference on Advances in Materials Science and Engineering (AMSE 2012), Bangkok, Thailand.
  • Shibinlal M.K. and Aminudin Hj Abu,”Eigenvector Normalization in Structural Design Sensitivities”, Conference on Emerging Trends in Mechanical Engineering 201 2 ( NCE TIME 12),Satyabama Universiti, Chenai, India.
  • Shibinlal M. K. and Aminudin Hj. Abu,”An Efficient Method for the Calculation of Eigenvector Design Sensititvities”, International Conference of Emerging Trends in Engineering & Technology College of Engineering, Teerthanker Mahaveer University 201 2, India.
  • Rizal I,Wira J. Y, Aminudin A, Azman Z. A,”Thermal Energy Harvesting From Automative Waste Heat”, The 201 2 International Conference on Energy and Environmental Protection (ICEEP 201 2), Hohhot, China.
2011:
  • Mohd Fitri Mohd Yakub, Aminudin Abu, Abdul Qadir,”Comprative Study on Control Method for Two-Mass Systems”, The 2nd International Conference on Advance Science Engineering & Information Technology (2nd ICASEIT) 201 1 , Impiana Hotel, KLCC, Kuala Lumpur.