Publications

ISI Journal :

2018

  • Marwan Hafeedh Younusa, Shahrouz Zamani Khalajabadic, Muhammad Azizi Mat Yajid, Aminudin Bin Haji Abu, Odai Falah Ameena, Norizah Redzuan, Norhayati Ahmadd,Muhammad Firdaus Omar, Raja Kamarulzaman Raja Ibrahim, “A Comparative Study Of Nanocrystalline Sic Thin Films On Multimode Optical Fiber Sensors, Synthesized Via Dbd-Ntp And 150 Mhz Vhf-Pecvd”, Ceramics International vol.44, pp.3417–3429, 2018 ( Q1, IF 2.986).
  • Shahrouz Zamani Khalajabadi, Aminudin Bin Haji Abu, Norhayati Ahmad, Muhammad Azizi Mat Yajid, Norizah Bt Hj Redzuan, Rozita Nasiri, Waseem Haider, Iman Noshadi, “Bio-Corrosion Behavior And Mechanical Characteristics Of Magnesium-Titania-Hydroxyapatite Nanocomposites Coated By Magnesium-Oxide Flakes And Silicon For Use As Resorbable Bone Fixation Materia”, Journal of the Mechanical Behavior of Biomedical Materials, vol.77, pp.360–374, 2018 (Q2, IF 3.11).
  • Kuheli Mondal (Das), Saurav Das, Aminudin Bin Hj Abu, Nozomu Hamada, Hoong Thiam Toh, Saikat Das, Waleed Fekry Faris, “All-pass filtered x least mean square algorithm for narrowband active noise control”,  Applied Acoustics, vol.142, pp.1–10, 2018 (Q2, IF 1.721)
  • N. Omar, A. M. A. Wahab, Z. A. Rasid, A. Abu, N. F. M. N. Rudin, “Parametric resonance of shaft with variable slenderness ratio”, International Journal of Engineering & Technology, vol.7 (2), pp.759-763, 2018 (Q4, IF 0.625).
  • Zarina Yusof, Zainudin A.Rasid, Jamaluddin Mahmud, “The Active Strain Energy Tuning on The Parametric Resonance Of Composite Plates Using Finite Element”, Journal of Mechanical Engineering, Vol SI 5(1), pp.104-119, 2018 (IF 1.181)

2017

2016

  • Fitri Yakub, Shihao Lee, and Yasuchika Mori: Comparative study of LQR and MPC control method with disturbance observer for rollover prevention in inclement environments. Journal of Mechanical Science and Technology: (Q3, IF=0.838) Accepted.

2015

2014

  • Fitri Yakub, Ahmad Zahran Md Khudzairi, Yasuchika Mori: Recent trends for practical rehabilitation robotics, current challenges and the future. International Journal of Rehabilitation Research: 03/2014; 37(1):9-21. Q3, IF=1.114, DOI:10.1097/MRR.0000000000000035.
  • Lee Kee quen, Aminudin Abu, Pauziah Muhamad, Naomi Kato, Asnizah Sahekhaini Hanida Abdullah,”Investigation on the Effectiveness of Helical Strakes in Supressing VIV of Felxible Riser”, Applied Ocean Research, vol. 44, 2014,82~91.(IF:1.532)

2013

  • Jae-Eun Jeong, In-Hyung Hyang, Aminudin bin Abu, Kyoon Jun Cha, Jae Eung Oh, “Development of a New Sound Quality Metrics fir Evaluation of Interior Noise in a Passenger Car Using Logarithmic Mahalanobis Distance”, Proceeding of the Institution of Mechanical Engineers Part D, Journal Automobile Engineering, vol.227,No. 1 0, 201 3, 1 363-1376, (IF:0.583)

2012

  • B. A Aminudin, M. Khairul Khalid, Kee Quen Lee, M. Amirudin Ismail,“Reduction of Vibration and Noise in Air Compressor System Using Design of Experiment Method”, Journal of Advanced Science Letters. Vol.1 9 ,No. 1 , 201 2 , 54-60,(IF:1 .25)
  • S. Asnizah, M. Pauziah, B. A. Aminudin, A. Hanida, and J. Y. Lee”Damage Detection in Static Beams via Wavelet-Based Technique”, Journal of Advance Science Letters. Vol. 1 9, No. 2, 201 2, 433-438, (IF:1 .25)
SCOPUS Journal :

2018

  • Hussain, A.K, Lee, K.Q, Aung, L.M., Abu, A., Tan, L.K., Kang, H.S. “Pressure Variation of Developed Lapping Tool on Surface Roughness”, IOP Conference Series: Materials Science and Engineering, vol.290 (1), art. no. 012014, 2018.  DOI: 10.1088/1757-899X/290/1/012014
  • Zaw, T., Abu, A., Fawazi, N., Wahab, A.M., “Effects of Parameters of Helmholtz Resonator on Transmission Loss of Hybrid Muffler”, International Journal of Engineering and Technology(UAE), vol.7 (3), pp.151-157, 2018.  DOI: 10.14419/ijet.v7i3.17.16641
  • Roslan, S.A.H., Hassan, M.Z., Rasid, Z.A., Ibrahim, H.I., “Tensile Behaviour of Chemical Treatment for Bamboo Epoxy Composites”, Chemical Engineering Transactions, vol.63, pp.745-750, 2018.  DOI: 10.3303/CET1863125
  • Mohd Hishamuddin bin Unuh, Pauziah binti Muhamad, Norfazrina Hayati binti Mohamad Yatim, Mohamad Amirudin bin Ismail, Zaimi bin Tanasta, “Vibration Isolation Analysis of New Design OEM Damper for Malaysian Vehicle Suspension System Featuring MR Fluid”, Materials Science and Engineering 290(1), 012047, 2018. DOI : 10.1088/1757-899X/290/1/012047
  • Yosri, M.H., Muhamad, P., Ismail, M.A., Yatim, N.H.M., “Air ionizer application for electrostatic discharge (ESD) dust removal in automotive painting industry”, Materials Science and Engineering, Vol. 290, Issue 1, Article number 012051, 2018.
  • Tanasta, Z., Muhamad, P., Kuwano, N., Norfazrina, H.M.Y., Unuh, M.H., “Reduction of Defects on Microstructure Aluminium Nitride Using High Temperature  Annealing Heat Treatment” Materials Science and Engineering, 328 (1), art. no. 012019, 2018.  DOI: 10.1088/1757-899X/328/1/012019
  • Unuh, M.H., Muhamad, P., Norfazrina, H.M.Y., Ismail, M.A.a Tanasta, Z., “Vibration isolation analysis of new design OEM damper for Malaysia vehicle suspension system featuring MR fluid”, Materials Science and EngineeringVol. 290, Issue 1, Article number 012047, 2018.
  • Wahab, A. M. Abdul, Nuh, A., Rasid, Z.A., Abu, A., Tanasta, Z., Hassan, M.Z., Mahmud, J., “Tensile behaviours of single-walled carbon nanotubes”, Materialwissenschaft and Werkstofftechnik, Vol. 49, Special Issue, pp. 467-471, 2018.
  • Aishah Johari, Fitri Yakub, Hatta Ariff, Zainudin A. Rasid, Shamsul Sarip, Rudzidatul Akmam Dziyauddin, Mohd Zamzuri, Ab Rashid, Azizul Azizan, Yasuchika Mori, “Improvement of Pitch Motion Control of an Aircraft System”, TELKOMNIKA Telecommunication, Computing, Electronics and Control, 2018.  DOI: http://dx.doi.org/10.12928/telkomnika.v16i5.7434
  • Yakub, F., Muhammad, P., Daud, Z.H.C., Fatah, A.Y.A., Mori, Y., “Enhancing Ride Comfort of Quarter Car Semi-Active Suspension System Through State-Feedback Controller”, 2017 Asian Control Conference, ASCC 2017, pp. 406-411, 2018.  DOI: 10.1109/ASCC.2017.828720
  • Sharifah Munawwarah Syed Mohd Putra, Fitri Yakub, Mohamed Sukri Mat Ali, Noor Fawazi Mohd Noor Rudin, Zainudin A. Rasid, Aminudin Abu, Mohd Zamzuri Ab Rashid, “Improvement on Ride Comfort of Quarter-Car Active Suspension System Using Linear Quadratic Regulator”, Proceedings of the Second International Conference on the Future of ASEAN (ICoFA) 2017, Vol.2, pp.431-441, 2018.
  • Roslan, S.A.H., Rasid, Z.A., Hassan, M.Z., “Bamboo reinforced polymer composite – A comprehensive review”, Materials Science and Engineering, vol.344 (1), art. no. 012008, 2018.  DOI: 10.1088/1757-899X/344/1/012008

2017

  • CM Hasrizam; Noor Fawazi, “Damage Identification Based on Curvature Mode Shape using Cubic Polynomial Regression and Chebyshev Filters”, IOP Conference Series: Materials Science and Engineering 271(1), 012091   DOI : 10.1088/1757-899X/271/1/012091

2016

  •  Ismail, Mohamad Amiruddin; Muhamad, Pauziah; Abu, Aminudin,”Modelling and Design Smart Controller of Magneto Rheological using Bouc- Wanand Sim Model for Motorcyccle Suspension System”,JURNAL TEKNOLOGI   Volume: 78   Issue: 6-13   Pages: 31-36   Published: 2016.
  • Fitri Yakub, Shamsul Sarip, Aminudin Abu, Yasuchika Mori: Study of Model Predictive Control for Path Following Autonomous Ground Vehicle Control under Crosswind Effect. Journal of Control Science and Engineering: 3/2016; ArticleID6752671; 18pages.
  • Saurav Das, Hoong Thiam Toh, Aminudin Bin Hj. Abu, Saikat Das, Kuheli Mondal,  Abhijnan Sarkar, “Flow in Straight through Labyrinth Seal: A comparison of Fluid Structure Interaction Effects” ,Jurnal Teknologi, Vol.78, 2016.

2015

  • Fitri Yakub, Yasuchika Mori: Heavy Vehicle Stability and Rollover Prevention via Switching Model Predictive Control. International journal of innovative computing, information & control: IJICIC 10/2015; 11(5):1751-1764.
  • Fitri Yakub, Yasuchika Mori: Minimizing Tracking Error in Path Following Control of Autonomous Ground Vehicle. ICIC Express Letters: 06/2015; 9(6):1-7.
  • Fitri Yakub, Yasuchika Mori: Enhancing Path Following Control Performance of Autonomous Ground Vehicle through Coordinated Approach under Disturbance Effect. IEEJ Transactions on Electronics Information and Systems: 01/2015; 135(1):102-110. DOI:10.1541/ieejeiss.135.102.
  • Oo Kyaw Nyein, Aminudin Bin Abu, Aung Lwin Moe and Asnizah Sahekhani, “Experimental Modal Analysis of Vehicle Exhaust System to Determine Hanger Location Using Root Mean Square Value” 2015 Malaysia-Japan Joint International Conference (MJJIC2015),Ube, Yamaguchi, Japan.
  • Norfazrina, H. M.Y., Muhamad, P., Aminudin, B. A., Wahab, A. M. , Raihan, M.R. “Application of Conditioned Reversed Path Method To Large Multi-Degree-Of-Freedom Non Linear Structure”, (2015) ARPN Journal of Engineering and Applied Sciences, Vol no.10 (15), pp. 6571-6577.
  • Wahab, A.M.,Rashid, Z.A., Mohd Rudin, N. F., Abu, A. “Dynamic Stability of Shaft Interconnected through Joint: A review”,  (2015) ARPN Journal of Engineering and Applied Sciences, Vol no.10 (15), pp. 6310-6318
  • Siti Amni Husna Roslan,Zainudin A Rasid,”The Natural Fibre Composites Based on Bamboo Fibres: a Review”, 2015) ARPN Journal of Engineering and Applied Sciences,V0l no. 24, March 2015.
  • Oo Kyaw Nyein,Aminudin Abu ,Aung Lwin Moe, “Numerical Analysis of Vehicle Exhaust System to Determine Hanger Location Using Root Mean Square Value”, (2015) ARPN Journal of Engineering and Applied Sciences, Vol no.10 (15), pp. 6209-6213.
  • Asnizah Sahekhaini, Pauziah Muhamad, Masayuki Kohiyama,Aminudin Abu, Lee Kee Quen and Hanida Abdullah ” A Study on Structural System Identification and Damage Detection for Free Vibration Response using the Wavelet Transform”  Applied Mechanics and Materials Vols. 752-753 (2015) pp 1029-1034
  • Hanida Abdullah, Aminudin Abu, Pauziah Muhamad,Asnizah Sahekhaini and Lee Kee Quen ” Analysis of Baffle Effect for Measuring Transmission Loss”  Applied Mechanics and Materials Vols. 752-753 (2015) pp 1263-1268
  • Norfazrina H.M.Y, Muhamad P., Aminudin B.A., Raihan M.R.,Azella A.W and Zetty R.M.S ” Conditioned and Orthogonalised Reverse Path Nonlinear Methods on Multi-Degree-of-Freedom System”  Applied Mechanics and Materials Vols. 752-753 (2015) pp 558-563
  • Ahmad Aizuddin Abd Aziz1, Shamsuddin Sulaiman,Aung Lwin Moe1, and Aminudin Bin Abu ” Investigation of Plastic Injecting Moulding Process Optimization in Complex Shape Product” Applied Mechanics and Materials Vol. 695 (2015) pp 260-264
  • Zetty R.M.S, Aminudin B.A., Aung L.M., Khalid, M.K., Norfazrina H.M.Y and Raihan N.M.R ” Investigation of Sensitivity Effect Based on Mass and Stiffness Modification in Automobile Crankshaft”  Applied Mechanics and Materials Vols. 752-753 (2015) pp 839-844

2014

  • Fitri Yakub, Yasuchika Mori: Enhancing Rollover Prevention and Vehicle Stability of Heavy Vehicle under Disturbance Effect. Applied Mechanics and Materials: 11/2014; 695:596-600. DOI:10.4028/www.scientific.net/AMM.695.596.
  • “Numerical Simulation of Hydraulic Jump Using the Improved Space-time Conservation Element and Solution Element Method”,Applied Mechanics and Materials, Vol. 575 (2014),790-799.
  • Saurav Das, Dr.Toh Hoong Thiam,”Mechanical Growth of Labyrinth Seal,Applied Mechanics and Materials”, Vols.465-466 (2014),578-581.
  • “Investigation of Severe Plastics Deformation in Commercially Pure Copper”,Applied Mechanics and Materials,Vols.664,122-127(2014).
  • “An Investigation of Lapping Characteristics for Mirror like-finish Using a Lath with Linear motion”,Applied Mechanics and Materials,Vol 564, 469-474(2014).

2013

  • MS Noorazizi, B. A. Aminudin, Zetty Rohaiza,”Systematic FEA Study of Vehicle Exhaust System Hanger Location Using ADDOFD Method”, Applied Mechanics and Material Journal, Vol. 392, 201 3, 161 -1 64
  • Kee Quen Lee, Abu Aminudin, Muhamad Pauziah,”Investigation of Wide Range of Flow around Circular Cylinder Using Turbulence Model”, Advanced Materials Research, vol. 664,2013, 878-883.
  • Hanida Abdullah,Aminudin Abu,Pauziah Muhammad,Asnizah Sahekhaini,Lee Kee Quen,”On Theoretical of Transmission Loss in Exhaust Muffler System”, Advanced Materials Research, vol. 647, 201 3, 848~853.

2012

  • Fitri Yakub, Andika Aji Wijaya, Mustafa Al-Ani: Practical Control for Two-Mass Positioning Systems in Presence of Saturation. 03/2012; 10(1):91-102. DOI:10.11591/telkomnika.v10i1.658.
NON INDEXED Journal :

2015

  • Aminudin Abu,Aung Lwin Moe,Asnizah Sahekhaini,Zetty Rohaiza Md.Sahak,Sanda P. Sone,”On the Improvement of Vibration Level Of Crankshaft System using Design Of Experiment”, Frontier Applied Plasma Technology,Vol.8(Jan,2015)pp.41-46.

2014

  • “Vibration Engineering and Its Application in Malaysia”, Plasma Application and Hybrid Functionally Matrials, Vol.23, 55-56(2014)

2012

  • Aminudin Abu, Asnizah, Hanidah, Pauziah and Nazli,”A Prediction of Acoustics Characteristics for Steam Generator System”, Journal of IEM, Vol. 73, No. 1 , 201 2, 41 ~49.
  • Mohd Fitri Mohd Yakub, Aminudin Abu, Abdul Qadir,”Comprative Study on Control Method for Two-Mass Systems”, International Journal on Advance Science Engineering Information Technology,Vol 2, No 3, 2012, 63~68
  • Shibinlal M. K. and Aminudin Hj. Abu,”An Efficient Method for the Calculation of Eigenvector Design Sensititvities”, An international journal of Science and technology, vol.1 , no 1 , 201 2

2011

  • Mohd Fitri Mohd Yakub, Aminudin Abu and Rini Akmeliawati, “Improved NCTF Control Method dor a Two-Mass Rotary Positioning System”, Journal of Intelligent Control and Automation, vol. 2, No. 3, 2011 , 351 ~363
Book Chapters :
  • Fitri Yakub, Yasuchika Mori: Exploting the Orthonormal Function Based on Model Predictive Control for Automotive Application. AsiaSim 2014, Edited by Satoshi Tanaka, Kyoko Hasegawa, Rui Xu, Naohisa Sakamoto, Stephen John Turner, 10/2014: chapter Simulation of Instrumentation and Control Application: pages 278-290; Springer Berlin Heidelberg., ISBN: 978-3-662-45288-2.
  • Fitri Yakub, Ahmad Zahran, Yasuchika Mori: Quiet Standing of Time-Delay Stability with Derivative Feedback Control. The Malaysia-Japan Model on Technology Partnership, Edited by Khairuddin Ab. Hamid, Osamu Ono, Anas Muhamad Bostamam, Amy Poh Ai Ling, 11/2013: chapter Science and Technology: pages 59-70; Springer Japan., ISBN: 978-4-431-54438-8.
  • Fitri Yakub, Rini Akmeliawati, Aminudin Abu: Practical Control Method for Two-Mass Rotary Point-To-Point Positioning Systems. PID Controller Design Approaches – Theory, Tuning and Application to Frontier Areas, 03/2012; ISBN: 978-953-51-0405-6.