Select Page

Academic

Noor Fawazi Md. Noor Rudin
Dip.Eng (Associate of Engineering) Computer Aided Mechanical Design (Dongyang Mirae University),
B.Sc. Mechanical Engineering (Hanyang University, Seoul),
PhD Mechanical Engineering (Hanyang University, Seoul)
 Noor-Fawazi

Senior Lecturer
Email:fawazi.kl@utm.my
Tel:
Fax:
URL: https://sites.google.com/site/ideapojack/home

Research Interests
  • Mechanics Based Modeling/Analysis/Design (Structures/Machines)
  • Structural/Machine Dynamic, Vibration and Noise/Sound Quality
  • Computer Aided Engineering (CAE), Design of Experiment (DOE), Design Optimization
Previous Positions
  • Tutor, UTM Razak School of Engineering and Advanced Technology
  • Tutor, College Science and Technology, UTM
Professional Membership
  • Graduate member of Board of Engineer Malaysia (BEM)
    (Jurutera Siswazah –No Pendaftaran:62996A)
  • Member of Korean Soc. for Noise and Vibration (KSNVE)
  • Member of American Soc. of Mechanical Engineering (ASME)
Activities
  • Committee International Conference on Robust Quality Engineering (ICRQE 2013) 22~26 April 2012, UTM
  • Participated Taguchi Method Workshop -UTM 
  • Participated seminar isu-Isu semasa dan cabaran ke atas aqidah – UTM
  • Industrial Research Project (Responsible Research Student) – Collaboration with (a) Korea Evaluation Institute of Industrial Technology (KEIT) (b) Korea Automotive Technology Institute KATECH (c) SAMBO MOTOS (Manufacturer) (d) Donga Heat Treatment Center and Lab. For Noise and Vibration Control, Hanyang University.
  • Participated seminar on Design and Rapid Prototype (PDS (M) Sdn. Bhd.) SIRIM
  • Participated VPG Intermediate Software Training (Virtual Tech Consulting Sdn. Bhd.)
  • Participated Kursus Pengajaran Menggunakan Teknologi (E-Pembelajaran) UTM
Awards
  • Best Research Paper Award. Awarded by Korean Soc. of Noise and Vibration (KSNVE) and LMS (No 11-07) Proceedings of KSNVE Annual Spring Conference 2011, Haiwon Resort. South of Korea
  • Awarded Malaysian Government Look East Policy Scholarship
  • Awarded as Best Student (Usu-SSang) in Computer Aided Mechanical System (Dong Yang Mirae University)
Publications

Conferences

  • Noor Fawazi et. al.. 2012. “The Prediction of Energy Flow in Stiffened Plate using Vibration Intensity” Proceeding Korean Society for Noise and Vibration, pp.757-758, 2012. 4, Korea.
  • Noor Fawazi et. al.. 2011. “Vibration Intensity- Computation of Single Plate with Uniform Force Excitation using FEM” Proceeding Korean Society for Noise and Vibration, pp.392-393, 2011.10., Korea
  • Noor Fawazi et. al.. 2010. “Load Displacement Prediction for a Conical Disk Spring using the Energy Method” Proceeding Korean Society for Noise and Vibration pp.271-272, 2010. 10. Korea
  • Noor Fawazi et. al.. 2010. “A Geometric Design Algorithm for a Slotted Disc Spring from Early Prescribed Function”  ICSV 17, pp.1-6, 2010.07. International Congress on Sound and Vibration, Egypt
  • Noor Fawazi et. al.. 2010. “Geometric Design of Slotted Disc Spring for a Prescribed Load Displacement,” IMECE2010, pp.1-10, 2010.11. ASME, Vancouver, Canada
  • Noor Fawazi et. al.. 2009. “Experimental Investigation of Shear Modulus of Anisotropic Magneto-rheological Elastomer due to Volume Percent of MRP and Magnetic Field(II)” Proceeding Korean Society for Noise and Vibration pp.272-273, 2009. 4. Korea
  • Noor Fawazi et. al.. 2009. “Prediction of Nonlinear Deflection of Belleville Spring”  Proceeding Korean Society for Noise and Vibration pp.890-893, 2009.11, Korea
  • Noor Fawazi et. al.. 2009. “Identification of Exiting Source Location of Vibrating plate”  Proceeding Korean Society for Noise and Vibration pp.222-223, 2009.04, Korea
  • Noor Fawazi et. al.. 2009. “Vibration Intensity Analysis to Localize Vibration Source on Exiting Plate” International Conference on Advance in Mechanical Engineering, pp.1-4, 2009.06. ICAME, Penang, Malaysia
  • Noor Fawazi et. al.. 2008. “Identification of In-Plane and Out-plane mode analysis of a crank shaft due to structural modification”  Proceeding Korean Society of Mechanical Engineering ,Mei 2008, Taegu Korea.
  • Noor Fawazi et. al.. 2008. “Non-linearity of the Disc Spring According to Lamination Method Using Numerical Simulation” Proceeding Korean Society for Precision Engineering pp. 189-190 (11~13 May 2008, Chaeju Island, Korea.
  • Noor Fawazi et. al.. 2008. “In-Plane and Out-plane mode analysis of a crank shaft due to structural modification” International Conference on Scinece and Technology, Penang , Malaysia,12~13 December 2008
  • Noor Fawazi et. al.. 2008. “Identification of Dynamic Characteristics for Lumped Mass Beam Model due to Changes of Mass” International Congress and Exposition of Noise Control Engineering, 26~29 October 2008 Shanghai, China.
  • Noor Fawazi et. al.. 2007. “Analysis of the front Disk Brake Squeal using Kriging Method” Proceeding Korean Society of Mechanical Engineering , pp. 68-73, 2007.10,Korea.
  • Noor Fawazi et. al.. 2007. “Experimental Investigation on MRE considering magnetic field and CIP”  Proceeding Korean Society for Noise and Vibration, 15~16 Nov. 2007, Korea
  • Noor Fawazi et. al.. 2007. “The Sound Quality Evaluation and preference Analysis of Vacuum Cleaner”  Proceeding Korean Society for Noise and Vibration, pp.1297-1301,15~16 Nov. 2007, Korea
  • Noor Fawazi et. al.. 2007. “Experimental Modal Analysis of Various Condition Joints of Beams”  Proceeding Korean Society for Noise and Vibration, 15~16 Nov. 2007, Korea

Journals

  • Noor Fawazi et. al.. 2013. “An Inverse Algorithm of Nonlinear Load-Displacement for a Slotted Disc Spring Geometric Design.” International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 137-145
  • Noor Fawazi et. al.. 2012. “A load–displacement prediction for a bended slotted disc using the energy method.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science August 2012 vol. 226 no. 8 2126-2137.
  • Noor Fawazi et. al.. 2012. “Sound Quality Evaluation for Laundry Noise by a Virtual Laundry Noise Considering the Effect of Various Noise Sources in a Drum Washing Machine”  Transactions of the Korean Society for Noise and Vibration Engineering, v.22, no.6, 564-573, June 2012
  • Noor Fawazi et. al.. 2012. “Improved Transmission Path Visualization of Vibration Power Flow for Stiffened Plate Using Streamlines Representation”  Transactions of the Korean Society for Noise and Vibration Engineering,v.22, no.7, 692-700, July 2012
  • Noor Fawazi et. al.. 2012. “Improved Vibration Vector Intensity Field for FEM and Experimental Vibrating Plate Using Streamlines Visualization”  Transactions of the Korean Society for Noise and Vibration Engineering ,v.22, no.8, 777-783, August 2012